Answers are grounded in this paper and cite their sources.
Approximately 70% of conventional fertilizers applied to soil are lost to the environment, mainly through leaching, especially in sandy and organic soils. This inefficiency increases environmental impact and reduces nutrient use efficiency. Controlled-release fertilizers (CRFs) have emerged as a viable strategy to regulate nutrient availability over time. In this context, biodegradable polymers are promising coating materials due to their ability to degrade gradually in soil. Blends based on poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) have been investigated; however, their thermodynamic immiscibility compromises interfacial adhesion and overall performance. To overcome this limitation, in situ reactive extrusion was employed using maleic anhydride as a grafting agent and dicumyl peroxide as an initiator, aiming to enhance phase compatibility. Additionally, the fully organomodified bentonite clay was incorporated as a functional filler and urea adsorbent. PLA/PBAT (70/30 wt %) system containing 2 phr maleic anhydride, 1 phr dicumyl peroxide, and 3 wt % bentonite was processed under different screw speeds and feed rates to determine the optimal conditions of processing. The composites were characterized in terms of thermal behavior, morphology, and water absorption. The optimal formulation, obtained at lower screw speed and higher feed rate, exhibited improved physicochemical properties. A CRF was produced by adding 10 wt % of urea to the optimized system. Leaching tests demonstrated gradual nutrient release, with a maximum released fraction 20.7% lower than that of the PLA/PBAT/urea system without bentonite clay, confirming the positive effect of bentonite on nutrient retention and controlled-release performance.
No takes yet. Share an insight, caveat, or question.
Almeida et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: