Answers are grounded in this paper and cite their sources.
High-Al-content AlGaN epitaxy on Si substrates is very advantageous to realize the wafer-scale fabrication of ultraviolet optoelectronic devices in thin-film configuration, which, however, is hindered by the drastic cracking issue owing to the large mismatch in thermal expansion coefficient between III-nitrides and Si. Herein, a void cushion strategy is proposed to get rid of the conventional one on the premise of compressive strain, where the voids with a mean spacing of ~3 μm are buried inside the epilayer through the process of intentional pre-cracking as well as subsequent filling-up. The voids extend along the 1120III-nitrides family of crystallographic directions and thus form a maskless network, which is demonstrated to act as a protection cushion and block the upward transmission of the biaxial thermal tensile strain, eventually preventing the cracks in epilayers during the cooling down process. As such, 4 inch surface-crack-free Al0.5Ga0.5N wafers are obtained by excluding an edge of 6 mm, on which 276.3 nm multiple quantum wells with a radiative recombination efficiency of 61.6% are stacked. This work paves a way for the high-performance AlGaN-based ultraviolet light emitters based on the Si platform.
No takes yet. Share an insight, caveat, or question.
Tan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: