Answers are grounded in this paper and cite their sources.
Photocurable waterborne polyurethane-acrylate (WBPUA) coatings are attractive systems for wood protection due to their low volatile organic compound content and fast UV curing. In this work, partially acrylated lignin (A-Ln) was evaluated as a bio-based reactive component and compared with the commercial trifunctional acrylate monomer trimethylolpropane triacrylate (TMPTA). The influence of reactive component structure on curing kinetics, network formation, thermomechanical behavior, mechanical performance, and coating durability was systematically investigated. TMPTA enhanced the photopolymerization rate, double-bond conversion, and crosslink density, with the best overall balance obtained at 10 wt%. This formulation produced stiffer and stronger films, with Young's modulus and tensile strength values around 140 and 14 MPa, respectively, although ductility decreased. In contrast, the A-Ln-containing formulation showed lower curing efficiency and crosslink density, but markedly improved tensile strength, elongation at break, and toughness, reaching around 18 MPa, 460%, and 53 MJ m −3 , respectively. When applied to wood, the TMPTA-based coating showed the lowest leaching value, indicating improved network compactness and water resistance. Conversely, the A-Ln-containing coating showed the lowest color variation after accelerated UV aging and better retention of surface hydrophobicity, attributed to the UV-absorbing aromatic structures of lignin. Overall, acrylated lignin provides complementary functionality to conventional acrylate diluents, enabling tougher and more UV-resistant WBPUA wood coatings.
No takes yet. Share an insight, caveat, or question.
Rodriguez-Benavente et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: