Answers are grounded in this paper and cite their sources.
This study investigates the effects of fiber type and cover thickness of ultra-high-performance concrete (UHPC) on rebar corrosion protection in accelerated corrosion testing. Three UHPCs with steel-fiber-reinforced (UF0.5, 0.5 vol%), glass-fiber-reinforced (UG0.5, 0.5 vol%), and stainless-steel wire mesh (UWMT2.5) were applied as 25 mm UHPC covers over reinforced concrete (RC) samples under accelerated corrosion testing in 3.5 wt% NaCl solution for 150 days. UF0.5 covers at two thicknesses (20 mm, T2.0; 25 mm, T2.5) were additionally evaluated. Performance was assessed using the rebar mass loss ratio (Mloss), six-position chloride-ion profiles spanning both the UHPC cover and the underlying substrate, the connected porosity ratio, scanning electron microscopy, and mechanical properties. UHPC covering RC substantially outperformed the RC reference (Mloss = 100 %). UHPC with wire mesh (UWMT2.5) clearly reduced Mloss (80.61 %). Glass-fiber UHPC (UG0.5T2.5, Mloss = 33.91 %) further improved protection, while steel-fiber UHPC delivered the best corrosion protection: Mloss = 23.18 % (T2.5) and 23.80 % (T2.0). The Cl- content of the steel-fiber UHPC cover was lower than that of the RC substrate and other UHPC covers. A 20 mm steel-fiber UHPC cover may be a potential cover thickness to enhance corrosion protection of RC.
No takes yet. Share an insight, caveat, or question.
NGO et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: