Answers are grounded in this paper and cite their sources.
A liquid injection gas chromatography–mass spectrometry (GC-MS) method was developed for the quantitative determination of ten selected volatile organic compounds (VOCs) in wines and spirits. Injection conditions were optimized by evaluating splitless sampling time, injector temperature, injection volume, injection mode, initial oven temperature, heating rate, and solvent cut time. The selected method used a 1 µL splitless injection at 250 °C, a splitless sampling time of 1.5 min, and an initial oven temperature of 40 °C. Quantification was performed using a separate standard-addition calibration in each sample matrix. The method was applied to four wines (Sauvignon Blanc, Gewürztraminer, Pinot Noir, and Lagrein) and an apricot spirit. It enabled the determination of major alcohols, esters, and acids across these compositionally different matrices, with limited sample preparation and no prior extraction or preconcentration. The results obtained for Pinot Noir were also compared with those from headspace solid-phase microextraction GC-MS (HS-SPME-GC-MS). Isoamyl alcohol, ethyl lactate, diethyl succinate, and 2-phenylethanol were detected by both approaches. Liquid injection GC-MS provided a practical approach for the quantitative analysis of selected VOCs, whereas HS-SPME-GC-MS offered greater detectability for trace VOCs. The two techniques therefore provide complementary information on the VOCs profile of alcoholic beverages.
No takes yet. Share an insight, caveat, or question.
Moretton et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: