Answers are grounded in this paper and cite their sources.
This study analyzes hazards and risk controls for the Inspect Replace Liner Chute activity at PT Catur Cahaya Niaga Mitra using Hazard Identification, Risk Assessment, and Risk Control (HIRARC). The work involves confined spaces, work at height, heavy components, lifting equipment, and hot work. A descriptive quantitative approach was used, drawing on field observation, interviews, and company records. Likelihood and severity were rated on five-level scales, and risk was calculated as R = L × S. The identified hazards include slips and trips, cuts and pinch points, falling manholes or liners, falls into the chute, respiratory distress in a confined space, and fire. The results show initial risk categories of High (57%), Medium (41%), and Low (2%). After recommended controls were assessed, the estimated residual categories were Low (54%) and Medium (46%), with High and Extreme at 0%. Controls include housekeeping, lever hoists, securing ladders and loads, full-body harnesses, confined-space entry procedures, gas testing, ventilation, hot-work permits, fire blankets, fire watch, and suitable personal protective equipment. Because documentation is insufficient to verify each control in the field, the residual distribution should be interpreted as an assessment estimate rather than measured evidence of reduced accidents.
No takes yet. Share an insight, caveat, or question.
Azzumardi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: