Answers are grounded in this paper and cite their sources.
Offshore wind turbines play an increasing role in the green transition. Multiple oil products are used in wind turbines, and knowledge on their emissions and fate in the marine environment is lacking. This study aimed to 1) assess the biodegradability of the gear oil, Renolin PG 320, in seawater and activated sludge inoculum, 2) determine primary biodegradation of additives and identify potentially persistent ones, and 3) compare test setups based on the OECD 301F, 306, and 309 guidelines. Renolin consists of polyalkylene glycols as base oil with aromatic alkylated amines as additives. Renolin was mineralized by 35% in an OECD 301F test at 20 mg/L with activated sludge inoculum, while no mineralization was observed in seawater at 20 mg/L (OECD 301F) or 2 mg/L (OECD 306). Solid Phase Microextraction coupled to GC–MS scan was used to assess biodegradation of unknown minor constituents at test end and in a modified 309 test in seawater at 100 μg/L. Three of seven detected constituents were identified (amine antioxidants and transformation product). Primary biodegradation of minor constituents was similar across the tests conducted with seawater, whereas high discrepancy was observed for some constituents between the test with activated sludge and the modified OECD 309 test in seawater, highlighting the need for caution when using sludge inoculum to assess marine persistence. This study illustrates how whole product testing can be used to screen for persistent additives while assessing overall biodegradability. Testing at multiple concentrations can help balance the tradeoff between environmental relevance and analytical signal.
No takes yet. Share an insight, caveat, or question.
Nørgaard et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: