Answers are grounded in this paper and cite their sources.
Optimizing nanofiller composition is crucial for enhancing the mechanical performance and moisture resistance of epoxy hybrid composites. In this study, the effect of nano-fillers ( Al 2 O 3 , MgO) on the physio-mechanical and microstructural properties of basalt-jute fiber-reinforced epoxy hybrid composites was investigated. Composite samples were fabricated using the hand lay-up technique, and mechanical, water absorption, and SEM tests were performed according to several ASTM standards. Three composite samples were fabricated for each nano-filler individually and in combination by varying the nano-particle content (2, 4, and 6 wt%) of the nano-particles. The results revealed that 2% MgO provided the best moisture resistance with considerably much lower uptake of 3.22% at the end of 7 days compared to the unfilled composite. Impact and flexural strength increased with the incorporation of MgO nanoparticles, and for 6% MgO, impact and flexural strength increased by 63.45% and 42.69% compared to the base, respectively. The composite containing 2 wt% Al₂O₃ achieved the highest tensile strength of 160.525 MPa, representing a 65.84% improvement. Morphological analysis was performed on the specimens after the tensile test to evaluate fracture behavior, interference of fibers with the matrix, and fiber pull-out of the specimens. The results of this research suggest that M-2, M-6, and A-2 are suitable for applications like automobile, aerospace, and other engineering fields where high resistance to moisture, high impact and flexural strength, and high tensile strength-to-weight ratio are essential.
No takes yet. Share an insight, caveat, or question.
Hasan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: