Answers are grounded in this paper and cite their sources.
To reduce mudflat disturbance caused by hydraulic dredging and facilitate efficient, environmentally responsible mechanized harvesting of buried bivalves, this study aimed to develop an accurate discrete element method (DEM) model for analyzing Mactra veneriformis (M. veneriformis)–machine interactions and optimizing harvesting parameters. The geometry of M. veneriformis was reconstructed using three-dimensional scanning and represented in EDEM using a multi-sphere model. The Edinburgh elasto-plastic adhesion (EEPA) model was used to describe M. veneriformis–M. veneriformis interactions. Physical experiments were used to determine the static friction and restitution coefficients for M. veneriformis–stainless steel contacts and the restitution coefficient for M. veneriformis–M. veneriformis contacts, while DEM simulations were used to calibrate the remaining contact parameters. The angle of repose (AOR) was measured using the cylinder-lifting method and selected as the macroscopic response for DEM calibration. A Plackett–Burman design followed by a Box–Behnken design was used to screen and optimize the influential contact parameters. The rolling friction coefficient, static friction coefficient, and surface energy of M. veneriformis–M. veneriformis contacts were identified as the principal factors affecting the AOR. The optimized values were 0.05, 0.30, and 2 J m⁻², respectively. Using these parameters, the simulated AOR was 23.17°, with a relative error of 4.09% relative to the physical experiment. The calibrated model was subsequently applied to mechanized harvesting simulations and validated against field harvesting tests, reproducing the principal trends observed under field conditions. The validated DEM model provides a basis for analyzing M. veneriformis–machine interactions and optimizing mechanized harvesting systems, while the proposed modeling and calibration framework may also support DEM studies of other bivalves.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: