Answers are grounded in this paper and cite their sources.
Multicomponent ocean bottom seismometer (OBS) data are essential for deep-water seismic imaging, but their horizontal components are usable only if geographically oriented, and their free-fall deployment leaves both the orientation and the landing position unknown. Existing methods rely on converted shear waves of variable quality, on teleseismic phases that are scarce in short active-source surveys, or on an accurately known position. We obtain the rotation angle and the OBS position jointly from the polarization of the direct water wave, which is polarized along the source–receiver line: the maximum-energy azimuths of many shots, fitted jointly along a straight line, give the angle as the asymptote of the curve and the position from its shape, with no prior information. For a synthetic OBS 0.8 km along and 1.5 km across the line (SNR = 5, 198 shots), the rotation angle was recovered with a standard deviation of 0.10° over 200 trials. In a field example (OBS01, 136 shots within 4 km), Δ = 41.78° ± 5.5° (total uncertainty; internal RMS 0.70°); at OBS17 (147 shots), Δ = 16.13° ± 8.7° (internal RMS 0.77°). The fit also returns the OBS offset relative to the survey line as a by-product, with an along-line coordinate constrained to about 0.1 km and a cross-line distance resolved to a few meters at OBS01, although the distance carries an 8–12% systematic underestimate near 300 m. After correction, the transverse direct-water-wave energy falls from 42.7% to 2.6% at OBS01 and from 13.2% to 8.0% at OBS17.
No takes yet. Share an insight, caveat, or question.
Lin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: