Answers are grounded in this paper and cite their sources.
The traditional route to MXenes is by the selective etching of the A element from MAX phases using fluoride-containing reagents. Amid the growing need to develop fluorine-free synthesis routes, understanding the etching mechanism and the role of fluorine is essential. Here, the etching behavior of Ti3AlC2 under fluorine-free and fluoride-assisted conditions was systematically investigated, revealing an initiating role of trace fluorine in governing etching selectivity. In the absence of fluorine, aggressive alkaline or acidic environments are required to penetrate the surface TiO2 passivation layer, which, however, results in nonselective dissolution or phase transformation, accompanied by degradation of the Ti–C framework. The results suggest that the formation of −O/–OH terminations on Ti is kinetically hindered under these conditions, preventing selective Al extraction while preserving the framework. Strikingly, introducing only very small amounts of fluorine, either by brief HF pretreatment or through in situ addition of a fluoride salt, fundamentally alters the surface chemistry. Fluorine promotes surface activation and the subsequent formation of −O/–OH terminations, helping stabilize the Ti layers and restore etching selectivity, even though the final MXenes contain predominantly −O/–OH end groups with minimal residual −F. These findings provide a mechanistic explanation for the role of fluorine in MXene formation, despite the predominance of oxygen-containing terminations in the final products, and establish a basis for developing MXene synthesis strategies with reduced fluorine usage.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: