Answers are grounded in this paper and cite their sources.
Background Conventional tubular flux-switching permanent magnet machine (TFSPMM) is made of axially stacked silicon steel sheets. When the changing magnetic fluxes pass through the silicon steel sheets vertically in the axial direction, a great number of eddy current loss will be produced. The soft magnetic composite (SMC) material is magneto-thermal isotropic and has very low eddy current loss, which is suitable for the machine with three-dimensional (3D) magnetic circuit and high frequency operation. However, its permeability is quite low, and its hysteresis loss is high. Objectives To overcome these demerits, a TFSPMM with hybrid core is proposed in this paper. The proposed topology adopts tangentially stacked silicon steel sheets and fan-shaped SMC modules to form the hybrid stator core, which combines the advantages of both materials and solves the contradiction between 3D magnetic flux conduction and high loss of conventional tubular machines. Methods The hybrid core changes the stacking direction of silicon steel sheet and makes use of the advantages of silicon steel sheet and SMC to improve the thrust and reduce the core loss. Firstly, the machine topology and detailed fabrication procedures are presented. Then, a nonlinear magnetic circuit model and core loss separation theoretical model of the hybrid core machine are established, and the electromagnetic performances including permanent magnetic (PM) flux linkage, detent force, back electromotive force (back-EMF), thrust force, and core loss of TFSPMM with different structures are calculated and compared based on 3D finite element method (FEM). Results The results are calculated by using 3D finite element method (FEM). Finally, a prototype of TFSPMM with hybrid core is manufactured and tested. The results show that compared with the pure SMC core machine, the optimized hybrid core machine achieves a 2% increase in thrust force and a 13.8% reduction in no-load core loss (15.5% reduction in load core loss) under the same overall dimensions and electrical constraints. Conclusions The FEM calculation results are verified by the experimental results.The proposed hybrid core structure and design method provide a new technical solution for the performance optimization of tubular linear machines, and have broad engineering application prospects.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: