Answers are grounded in this paper and cite their sources.
Cement manufacturing industry is responsible for 7–8% of global anthropogenic CO₂ emissions, and unlike the power sector, the dominant emission pathway – calcination of limestone – is inherent to the product chemistry and cannot be addressed through fuel switching. This manuscript presents a techno-economic evaluation of post-combustion CO₂ capture from cement kiln flue gas, comparing four amine-absorption process configurations across three regulatory-grade capture targets (85%, 90%, 95%). A steady-state Aspen Hysys process model was developed & validated against published industrial data from a cement plant. Parametric stress tests at 90% and 95% capture targets revealed non-linear thermodynamic penalties: the unintegrated base case enhanced energy consumption from 3.71 to 4.48 GJ/tCO₂, due to 25% increase in liquid-to-gas ratio. Two operational constraints emerged at 95% capture – reboiler temperatures approaching the MEA degradation threshold temperature (122°C) and absorber tray hydraulics reaching 82% of flooding velocity. Techno-economic analysis across twelve configuration-target combinations (four configurations x three capture targets) shows that Lean Vapor Compression (LVC) configuration achieves lowest Levelized Cost of Carbon Capture (LCCC) at $29.84/tCO₂ at 85% capture. The combined SSF + LVC topology, while thermodynamically superior, is insufficient to recover its additional hardware cost – therefore not recommended for industrial deployment.
No takes yet. Share an insight, caveat, or question.
Kharadi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: