Answers are grounded in this paper and cite their sources.
Cadmium (II) ions are highly toxic contaminants that can pose significant risks to environmental and human health, necessitating the development of sensitive and reliable analytical methods for their determination. In this study, an MXene@SiC nanocomposite-modified glassy carbon electrode (MXene@SiC/GCE) was developed for the electrochemical detection of Cd (II) ions. Carbon-based materials have been widely investigated for electrochemical sensing due to their high electrical conductivity, large specific surface area, and properties that enhance electron transfer. The MXene@SiC nanocomposite was prepared by combining Ti3C2Tx MXene and SiC at a 1:1 mass ratio. The structural and surface characteristics of the prepared materials were investigated by SEM, EDS, and FTIR analyses, confirming the successful integration of MXene and SiC. The electrochemical properties of the modified electrode were evaluated by cyclic voltammetry using the [Fe(CN)6]3−/[Fe(CN)6]4− redox probe. The effect of key experimental parameters, including scan rate, pH, accumulation time, and deposition potential, was investigated. The optimum conditions were found to be pH 5, an accumulation time of 350 s, and a deposition potential of −1.2 V. Under optimized conditions, the MXene@SiC/GCE exhibited a well-defined Cd(II) stripping response at approximately −0.9 V. Two linear concentration ranges were obtained: 0.5–1000 μg/L with the calibration equation I = 0.2932C + 1.5916 (R2 = 0.9893) and a higher concentration range with I = 0.04911C + 33.6442 (R2 = 0.9643). The developed electrode demonstrated a concentration-dependent response and satisfactory electrochemical characteristics, indicating that the MXene@SiC nanocomposite is a promising electrode-modifying material for Cd(II) determination in aqueous samples.
No takes yet. Share an insight, caveat, or question.
Konarbay et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: