Answers are grounded in this paper and cite their sources.
The decarbonization of industrial forming processes is a major challenge for large-scale steel component manufacturing. One promising strategy is the reduction of forming temperatures to lower heating energy consumption and CO₂ emissions. This study investigates the thermo-mechanical behaviour of 32CrB4 steel, a boron-alloyed material commonly used in high-strength fasteners for offshore wind turbines, under warm forming conditions (800–1100 °C, strain rates of 0.1–10 s⁻¹). Isothermal compression tests were conducted and used to develop an Arrhenius-type constitutive model, both peak-stress-based and strain-compensated, achieving a prediction accuracy with an average absolute relative error (AARE) of 5.26%. Additionally, processing maps based on the Dynamic Material Model were generated, identifying a safe and efficient forming window between 950 °C and 1000 °C at strain rates below 1 s⁻¹, where dynamic recrystallization (DRX) dominates, and flow instability is minimized. These findings provide quantitative and practical guidelines for the development of low-carbon, energy-efficient forming routes suitable for large wind turbine offshore components.
No takes yet. Share an insight, caveat, or question.
García et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: