Answers are grounded in this paper and cite their sources.
Polytetrafluoroethylene (PTFE) coatings have great potential in corrosion protection and oil/water separation because of their low surface energy, chemical inertness, and hydrophobicity. However, the intrinsically weak interfacial adhesion between PTFE and metal substrates seriously limits the long-term stability and practical application of PTFE-based coatings, especially under corrosive and repeatedly used conditions. In this work, a polydopamine/polytetrafluoroethylene (PDA/PTFE) composite coating was constructed on stainless steel mesh through in situ dopamine oxidative polymerization followed by PTFE spray coating. The PDA interlayer was introduced as an adhesive transition layer to improve the interfacial bonding between the stainless steel substrate and the PTFE outer layer, while the PTFE layer provided low surface energy, hydrophobicity, chemical shielding, and oleophilic properties. The optimized PDA deposition conditions were determined as pH 8.5, dopamine hydrochloride concentration of 0.0105 mol/L, reaction temperature of 50°C, reaction time of 6 h, and CuSO 4 /H 2 O 2 volume ratio of 3:1. Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) results confirmed the successful construction of a layered PDA/PTFE coating structure containing PDA-derived hydroxyl, amino, and aromatic groups as well as PTFE-derived fluorocarbon groups. The PDA/PTFE-coated mesh exhibited a water contact angle of 139.99°, indicating a significant transition from a hydrophilic PDA-modified surface to a hydrophobic fluorinated surface. Meanwhile, the composite coating showed corrosion inhibition efficiencies of 88.88%, 90.20%, and 90.71% in 0.1 mol/L HCl, pH 9.0 alkaline solution, and deionized water, respectively. In addition, the coated mesh achieved an oil permeation rate of up to 85% and maintained stable separation performance after three reuse cycles. These results demonstrate that PDA-mediated interfacial engineering effectively overcomes the poor adhesion of PTFE on metal substrates and enables the synergistic integration of adhesion enhancement, corrosion protection, and oil/water separation. This study provides a simple and effective strategy for designing multifunctional metal-based coating materials for oily wastewater treatment and surface protection.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: