Answers are grounded in this paper and cite their sources.
The increasing demand for high-performance carbon fiber composites has driven interest in the vacuum-bag-only (VBO) process as a cost-effective alternative to autoclave curing. However, the VBO process typically relies on low areal weight (LAW) prepregs, which often suffer from low production efficiency and high porosity in the resulting laminates. In this study, high areal weight (HAW) unidirectional carbon fiber prepregs were processed using the VBO process. The porosity and void characteristics of the laminates were systematically investigated under different processing conditions. The VBO process yielded a maximum porosity of 6.32%, whereas the autoclave process reduced porosity to approximately 1.03%. The absence of roll-in pressing significantly increased porosity to 15.64%, indicating the critical role of inter- ply compaction in void reduction. To further improve void reduction, hybrid layups of HAW and LAW prepregs were designed. The ply count ratio LAW: HAW=3: 1 achieved a minimum porosity of 1.73% in the central region, and the interlaminar shear strength reached 75.26 MPa, which was comparable to that of autoclave-process laminates. These findings demonstrate that the VBO process, when combined with optimized layup design and roll-in pressing, can produce HAW prepreg laminates with porosity levels approaching those achieved by autoclave processing, offering a viable low-cost manufacturing route for aerospace- grade composite structures.
No takes yet. Share an insight, caveat, or question.
Zhu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: