Answers are grounded in this paper and cite their sources.
Bio-based coating formulations containing glucomannan-xylan-carboxymethyl cellulose (CMC) that provide a water vapor barrier were prepared. The coatings were applied to high-grade paper surfaces. Various test methods were used to investigate the effects of applied coatings on the mechanical properties, barrier properties, and printability of the papers. Contact angle, surface tension, desiccant method for water vapor barrier properties; the spectrophotometer for CIE L*a*b* values of both printed and unprinted surfaces of base, coated, and calendered papers; and the gloss of paper and print using a glossmeter were employed. For uncalendered coated papers, formula F1 containing glucomannan, xylan, carboxymethylcellulose and glycerol showed an 18.37 % decrease in X -direction tensile strength, while F11, containing glucomannan, xylan and xylitol showed a 16.67 % increase. In addition, all coatings increased the elongation values of the base paper. Surface contact angles decreased on both calendered and uncalendered paper surfaces with surface coatings. The WVTR values of the coated papers showed a decrease of between 7.65 % and 16.26 % compared to the base paper. It has been determined that the coatings increase the brightness of paper and almost all CIE L*a*b* values were measured below the acceptable limit of Δ Eab* < 5.
No takes yet. Share an insight, caveat, or question.
Tutak et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: