Answers are grounded in this paper and cite their sources.
The strength-toughness trade-off in polyamide 6 (PA6) persists because most existing toughening strategies require high additive loadings, which inevitably sacrifice tensile properties. Herein, we report an in situ constructed nano-silica@cross-linked polyether (CPE) nanocomposite that serves as an exceptionally effective, low-dose toughening phase. This highly filled system features densely packed hydrophilic nano-silica within the CPE domains. The epoxy cross-linker covalently bonds with the terminal amine groups of PA6, ensuring spontaneous interfacial compatibilization between the toughening domains and the matrix. Impact energy is primarily dissipated through intense interparticle friction and collisions among the jammed nanoparticles confined within the toughening domains, a mechanism resembling shear-thickening fluids. With a total additive content of only 5 wt %, this nanocomposite toughening phase transforms PA6 into a supertough material without sacrificing tensile strength. The optimal formulation (2.0%nano-silica@3.0%CPE/PA6) delivers a notched Charpy impact strength of 125.85 kJ/m2 at 23 °C and 109.75 kJ/m2 at −30 °C, corresponding to 14.7-fold and 20.6-fold improvements over neat PA6, respectively, while retaining a tensile strength of 59.6 MPa, which is comparable to that of neat PA6 (58.3 MPa). This work presents a highly efficient strategy for toughening engineering plastics.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: