Answers are grounded in this paper and cite their sources.
Flank-wear prediction for a new tool usually relies on few microscope inspections. This study tests how far sparse inspections extrapolate in Swiss-type turning of 1.4571 stainless steel with coated-carbide inserts. A 3 × 3 × 2 factorial design (cutting speed, feed, cooling) was run once per condition: fourteen short tests of five parts, with maximum flank wear (VBmax) measured on alternate parts, and four long tests run to tool breakage, giving 104 VBmax values. Models were evaluated by leave-one-tool-out (LOTO) validation. The vibration-feature regressors tested did not transfer to unseen tools (R2 between −1.06 and −0.11, worse than predicting the mean). From three inspections, a physics-informed power-law wear model (monotone, decelerating) with a fleet-shared exponent extrapolated the long tests (VBmax ≤ 300 µm) with a mean absolute error of 16 µm, against 41 µm for a fleet-average curve and 33 µm for linear extrapolation; fixed-exponent and logarithmic fits gave 20–27 µm, so the concave shape carried most of the gain. With two inspections, the law offered no advantage. Finite LOTO conformal bands reached 90–95% empirical coverage (target 90%) but were 76–130 µm wide. Four breakages, after last inspections of 154–279 µm, were too few to identify a wear-based stop threshold.
No takes yet. Share an insight, caveat, or question.
Jurado et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: