Answers are grounded in this paper and cite their sources.
The focus on utilizing conductive materials (CM), such as fibers and powders, to produce electrically conductive concrete (ECON) has recently increased. Yet, limited studies explored the characterization and optimization of ECON with the hybrid use of CM. This study investigates the effect of hybridizing CM on the electrical conductivity, compressive strength, and water absorption of ECON. Using the Taguchi method, four distinct groups, each represented by an L 9 orthogonal array, were formulated and organized to create a set of 36 ECON mixes. Steel fibers (SF), carbon fibers (CF), graphite powder (GP), and carbon black powder (CB) were combined in hybrid mixes to develop the four ECON groups, corresponding to the SF/GP, SF/CB, CF/GP, and CF/CB combinations. Multi-response optimization through the hybrid Taguchi/TOPSIS method was also employed to determine the optimal combination of factors based on multiple performance criteria. The results indicated that increasing CM volume and fiber content substantially increased the electrical conductivity of ECON while also contributing to improved compressive strength and reduced water absorption. Although fibers were more effective than powders in enhancing conductivity, hybridizing the two CM types produced the most favorable balance among electrical, mechanical, and durability properties. A target conductivity of ≥ 100 mS/m was achieved using 350 kg/m 3 binder, 0.55 w/b, 6 % CM, and a 20/80 CM blend, highlighting the feasibility of developing multifunctional and durable ECON. An economic impact analysis showed that mixes made with CB and either type of fiber were most cost-effective.
No takes yet. Share an insight, caveat, or question.
El‐Mir et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: