Answers are grounded in this paper and cite their sources.
Submerged-arc welding generates a mineral slag that is commonly landfilled despite containing oxides relevant to cementitious systems. This study investigated ground submerged-arc welding slag (SAWS) as a mass-based partial replacement for Portland cement in mortar. The slag was characterized by X-ray fluorescence, X-ray diffraction, laser particle-size analysis, pycnometry, and a lime-based pozzolanic activity test. Mortars with 0% (reference), 25%, and 50% cement replacement were produced at a binder-to-sand ratio of 1:3 and a water-to-binder ratio of 0.50. Consistency, compressive strength, flexural tensile strength, mass loss, dry and saturated density, air void, and water absorption were evaluated; strength was measured at 3, 7, 28, 42, and 56 days. SAWS had a density of 3.42 g cm−3, D50 of 12.79 μm, and was dominated by CaO, MgO, SiO2, and Al2O3. Although XRD indicated a substantial amorphous contribution, the tested slag failed the compositional and lime-reactivity thresholds for classification as a pozzolanic material. Increasing replacement reduced fresh consistency and mechanical strength. Nevertheless, the 25% mixture developed 21.3 MPa compressive strength at 56 days and reached 5.6 MPa flexural strength, statistically comparable in magnitude to the control mean at that age. Bulk-density, air void, and absorption indicators changed by less than 6% across mixtures. The results identify 25% replacement as the technically preferable level among those tested for non-structural mortar applications, while highlighting the need for durability, leaching, and mechanistic validation before field implementation
No takes yet. Share an insight, caveat, or question.
Lermen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: