Answers are grounded in this paper and cite their sources.
Electrically conductive cementitious composites offer significant potential for self-heating applications, but conventional approaches require conductive additives throughout the material. This study proposes a hybrid composite combining 3D-printed conductive pathways with a conventional cementitious matrix, enabling localized heating while reducing additive consumption. Cement pastes containing 0.50–1.25 wt.% chopped carbon fibers (CFs) were characterized using electrical resistivity, impedance spectroscopy, and Joule-heating tests. The electrical percolation threshold was exceeded above 0.75 wt.% CF, with a marked improvement in heating performance between 0.75 and 1.00 wt.%. At 15 V, specimens containing 1.0 wt.% CF reached 68 °C within approximately 25 min, achieving a surface power density of around 1 kW/m2. A printable mixture containing 1.0 wt.% CF and 0.50 wt.% hydroxypropyl methylcellulose (HPMC) was subsequently developed to produce conductive pathways integrated into a conventionally cast matrix. Thermal imaging confirmed localized heat generation and effective heat transfer through the specimen. Increasing the applied voltage from 20 to 30 V raised the temperature above the conductive pathway from approximately 33 to 42 °C after 60 min. These findings demonstrate the potential of combining additive and conventional manufacturing to develop smart cementitious components with spatially controlled heating while limiting conductive additives to functionally relevant areas.
No takes yet. Share an insight, caveat, or question.
Szołdra et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: