Answers are grounded in this paper and cite their sources.
Acid fracturing is a key stimulation technology for high-temperature carbonate geothermal and hydrocarbon reservoirs. However, conventional hydrochloric acid systems suffer from rapid acid–rock reactions at high temperatures, strong corrosivity, large storage demands, and safety and environmental concerns. Here, a novel solid acid, MA-A (Modified Anhydride-based Acid), was prepared by modifying an organic acid anhydride, followed by metathesis and high-temperature calcination. FT-IR confirmed the introduction of carboxyl groups, providing the basis for sustained acid release. The acid-generation performance, dissolution behavior, acid–rock reaction kinetics, corrosion resistance, etched-fracture morphology, and fracture conductivity of MA-A were systematically evaluated. The results showed that 17% MA-A at 120 °C generated an effective acid concentration equivalent to 11.4% HCl and sustained H+ release for approximately 140 min, confirming its excellent retarded acid-generation capability. For Maokou Formation carbonate rock, 25% MA-A achieved an average dissolution rate of 90.2%, while its acid–rock reaction rate was lower than that of conventional hydrochloric acid systems. Moreover, MA-A maintained superior fracture conductivity retention under high closure stress. In addition, under the experimental conditions, MA-A caused much less corrosion of N80 steel than conventional acids, and with corrosion inhibitor GT, the system met high-temperature application requirements. Although the initial conductivity of MA-A-etched fractures was lower than that of gelled acid, it declined more slowly under high closure pressure, indicating better flow-channel retention. Overall, MA-A exhibited favorable acid-release, corrosion-control, and fracture-conductivity characteristics under the investigated laboratory conditions.
No takes yet. Share an insight, caveat, or question.
Shen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: