Answers are grounded in this paper and cite their sources.
Water channeling in offshore unconsolidated sandstone reservoirs motivates the development of injectable gels for water shutoff. A polymer prepared from acrylamide, N-vinylpyrrolidone, and cetyl methacrylate (designated ANC16) was combined with polyethyleneimine (PEI) and evaluated by FTIR, 1H NMR, dry-sample thermogravimetry, Sydansk bottle tests, and sand-pack flooding. FTIR and 1H NMR support the proposed functional groups and structural motifs of the precursor polymer. The formulation selected from the tested concentration series contained 0.5 wt% ANC16 and 0.25 wt% PEI. At 35,000 mg/L total salinity, the time to reach Sydansk grade D decreased from 64 to 22 h as temperature increased from 30 to 110 °C. Grade-H gels were observed at salinities of 0–30,000 mg/L at 90 °C. In the sand-pack experiment at 90 °C and 35,000 mg/L, the maximum precursor injection pressure was 0.185 MPa, and subsequent treatment reduced water-phase permeability by 97.85%. During flooding at 1 mL/min, injection pressure remained near 2.2 MPa from approximately four to 20 pore volumes. These results demonstrate delayed gel development, laboratory injectivity, and sustained flow restriction over the tested interval.
No takes yet. Share an insight, caveat, or question.
黄军立 et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: