Answers are grounded in this paper and cite their sources.
This study investigates the aerodynamic interaction between the wing and propeller of a tail-sitter unmanned aerial vehicle (UAV) over a range of fixed angles of attack relevant to its transition-flight regime. The investigation combines steady-state computational analysis using an actuator-disc representation of the propeller with wind-tunnel experiments on a scaled wing–propeller model. In the computational study, the propeller is simplified as an actuator disc and coupled with a rectangular wing. The coefficient of lift (CL) and the coefficient of drag (CD) are evaluated as functions of the propeller distance from the wing leading edge, its spanwise position relative to the wing root, and the angle of attack (α). The results indicate that positioning the propeller 125 mm from the leading edge and at 50% of the numerical model semi-span, measured from the wing root provides improved aerodynamic performance. For the experimental investigation, a scaled-down UAV model with a scale factor of 0.5 was used. The analysis was conducted at the optimised propeller position under both low and high angles of attack (α) at a free-stream velocity of 36 m/s. The results show that the propeller slipstream modifies the flow field around the wing. The changes are quantified in terms of the lift coefficient (CL), drag coefficient (CD), and lift-to-drag ratio (CL/CD). Compared with the wing-alone configuration, the wing–propeller configuration exhibits an increase in lift coefficient and lift-to-drag ratio, accompanied by a reduction in drag coefficient. The magnitude of these changes depends on the angle of attack. The numerical and experimental comparisons are used to assess the aerodynamic trends and the influence of propeller–wing interaction.
No takes yet. Share an insight, caveat, or question.
Bakthavathchalam et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: