Answers are grounded in this paper and cite their sources.
This study characterized occupational exposure to benzene, toluene, ethylbenzene, and xylenes (BTEX) and associated inhalation risks in plastic manufacturing in Da Nang, Vietnam. A two-stage design involved screening five factories, followed by 31 personal breathing-zone samples from 31 workers in two priority operations: decorative printing (n = 11) and product painting (n = 20). Samples were collected using activated coconut-charcoal sorbent tubes and analyzed by GC-FID according to the NIOSH 1501 Hydrocarbons, Aromatic framework. Non-carcinogenic and benzene-related carcinogenic risks were characterized using a 20,000-iteration Monte Carlo simulation. Decorative printing was toluene-dominant, with a mean 4-hr task-window TWA concentration of approximately 150 ppm (565.38 mg/m3), whereas product painting was xylenes-dominant, with a mean 4-hr task-window TWA concentration of 1.59 ppm (6.89 mg/m3). Mean benzene concentrations were 0.034 ppm (0.110 mg/m3) and 0.011 ppm (0.035 mg/m3) in printing and painting, respectively. Median hazard indices were 27.24 and 12.29, with corresponding 95th percentiles of 32.51 and 39.86. Under the central exposure-duration scenario of 14.6 years, the 95th-percentile benzene cancer risks were 7.9 × 10−5 and 2.9 × 10−5, respectively. Variability in non-carcinogenic risk was primarily attributable to the process-specific airborne concentration distributions. Within each fixed exposure-duration scenario, variability in benzene cancer risk was primarily attributable to airborne benzene concentration, whereas the exposure-duration scenarios shifted the overall risk magnitude. Under the 4-hr task-window scenario, the median hazard index remained above 1 in both operations. The distinct process-specific profiles support the use of process-specific exposure distributions rather than a single sector-wide estimate for plastic manufacturing. The findings support targeted solvent substitution, enclosure, local exhaust ventilation, and periodic personal monitoring in solvent-using plastic manufacturing.
No takes yet. Share an insight, caveat, or question.
Nguyen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: