Answers are grounded in this paper and cite their sources.
This paper presents the combined analytical and experimental results of pyrolysis applied to low-density polyethylene (LDPE), high density polyethylene (HDPE) and polyethylene terephthalate (PET) plastic waste for conversion into gaseous fuels to serve as an alternative source of fuel for applications in our homes and industries. The pyrolysis process was carried out in a nitrogen (N 2 ) gas environment using a tube furnace coupled with tar collection system and an in-line Micro-Gas Chromatography unit. The samples were heated from room temperature to approximately 1000 ° C at a rate of 10 ° C/min. The kinetic behaviour of LDPE, HDPE and PET pyrolysis was analyzed using the Kissinger-Akahira-Sunose (KAS) model, which provided an estimation of the activation energy required for plastic-to-fuel conversion. Thermogravimetric analysis (TGA) results showed a complete thermal decomposition of HDPE and LDPE into volatile products, whereas 80% of PET was volatilized. FTIR analyses of all samples indicated the presence of C–H and C = C functional groups which is associated to the methane and ethene gases produced from the pyrolysis. Carbon content is higher for HDPE and LDPE (∼85.7 and ∼84.10 wt%, respectively) compared to PET (∼62.21 wt%, whose oxygen content is ∼33.65 wt%). These results confirm that, PET differs in chemical and physical structures compared with HDPE and LDPE which possess similar chemical properties but differ in physical structures. Also, the high heating value (HHV) is higher for HDPE and LDPE (∼46.62 and 45.24 MJ/kg, respectively) compared to PET (22.94 MJ/kg). The predominant gaseous fuel produced from PET was CO (63.3 vol%), whereas that of HDPE and LDPE was CH 4 (60 vol% and 81.6 vol%, respectively).
No takes yet. Share an insight, caveat, or question.
Boamah et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: