Answers are grounded in this paper and cite their sources.
This study presents a comprehensive case study on the field performance of a long-narrow deep excavation constructed in soft clay for a railway tunnel project in Guangzhou. By integrating field monitoring data with theoretical calculations, comparative analysis, and statistical methods, the deformation behavior of the excavation system is systematically evaluated. Maximum diaphragm wall deflections ranged from 0.08% to 0.38% of the excavation depth ( H ), with an average of 0.19% H . These generally occurred within the depth interval of ( H − 6 m, H + 3 m). Maximum ground surface settlements varied between 0.02% and 0.4% H , averaging 0.19% H , with the primary influence zone extending up to approximately 1.5 H from the excavation wall. The ratio of maximum ground settlement to maximum wall deflection ranged from 0.4 to 2.08, with a mean value of 0.89. The analysis shows that the deformation of such long-narrow excavations is influenced by multiple factors, including excavation width, insertion ratio, basal treatment, construction quality, three-dimensional spatial effects, and spatial variability of soil properties, rather than by excavation width alone. Furthermore, the measured deformations were notably lower than the code-based warning thresholds, indicating that the current design approach, although safe, tends to be conservative. This suggests substantial potential for optimizing support systems in similar projects to achieve cost savings and reduce environmental impact without compromising safety. The empirical relationships presented herein-including deformation ranges, the settlement envelope, and the influencing factors-are derived from excavations with vertical diaphragm walls and are intended as a reference for similar long-narrow excavations in soft clay regions.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: