Answers are grounded in this paper and cite their sources.
This study investigates the use of a Bio-inspired Helical Sandwich Liner (BHSL) to enhance the performance of Reinforced Concrete Pipes (RCPs) under Three-Edge Bearing (TEB) loading. The BHSL consists of a sinusoidal aluminum core that progresses helically along the pipe axis between a Carbon Fiber Reinforced Polymer (CFRP) inner skin and a Glass Fiber Reinforced Polymer (GFRP) outer skin. A three-dimensional explicit finite element (FE) model was evaluated against two specimens from a published TEB test program: an unstrengthened control pipe and a four-ply CFRP-strengthened pipe. The peak load of the control specimen was predicted as 50.18 kN, within the experimental range of 49.1–50.5 kN, while the strengthened specimen was predicted as 113.7 kN compared with 111.2 kN experimentally. A flat sinusoidal configuration (G1) and three helical configurations with n c = 10 (G2), n c = 20 (G3), and n c = 30 (G4) were then simulated to investigate the effect of helix density. Under ideal bonding, the peak load increased by 186 % for G1 and up to 264 % for G4 relative to the bare pipe. Both peak D-load and initial ascending-branch stiffness increased with helix density, with G4 reaching 577.2 N/m/mm and 59.6 kN/mm, respectively. The Core/Liner energy ratio increased unevenly with helix density, from 31.8 % in G2 to 55.9 % in G3 and 59.6 % in G4, with the largest increase between G2 and G3, whereas the highest work-to-peak of 304.3 J was obtained for G2. Under breakable liner–concrete interface conditions, the peak-load ranking G2 < G3 < G4 was maintained, with G2, G3, and G4 retaining 88 %, 80 %, and 81 % of their respective ideally bonded peak capacities. G2 and G3 showed a more gradual capacity loss, whereas G4 exhibited a more abrupt post-peak reduction. Overall, helix density is an important geometric parameter for the BHSL response: load capacity, stiffness, and core participation increase with it, whereas pre-peak energy absorption does not follow the same trend, indicating a trade-off between peak capacity and deformation at peak under the investigated TEB condition.
No takes yet. Share an insight, caveat, or question.
Ghiaskar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: