Answers are grounded in this paper and cite their sources.
Introduction. Biopolymers are increasingly used in pharmaceutical technology as matrices for the delivery of medicinal substances, as bases for medical devices, and in implantable systems. A key requirement for their clinical use is the assurance of sterility. Due to the high sensitivity of most biopolymers to thermal, chemical, and radiation exposure, the selection and validation of an appropriate sterilisation method present a significant technological and regulatory challenge in the development of medicinal products and medical devices. Aim. To analyse modern methods for sterilising biopolymer compositions, systematise the associated risks to quality and stability, and formulate practical recommendations for selecting optimal sterilisation conditions for different classes of biopolymers. Materials and methods. A review and analysis of scientific publications from 2010 to 2025 was performed using the PubMed, Scopus, and Google Scholar databases. The methodology included risk analysis (FMEA) based on the criteria of probability, severity, and detectability for standard sterilisation methods: autoclaving, hot-air sterilisation, gas sterilisation (ethylene oxide and hydrogen peroxide), chemical sterilisation, radiation sterilisation (gamma and electron-beam radiation), and membrane filtration. The assessment of the impact of sterilisation on biopolymers was based on an analysis of changes in their physicochemical, structural-mechanical, and functional properties. Results and discussion. The most common methods in development practice were found to be autoclaving, radiation sterilisation, and membrane filtration, each of which has specific limitations. For thermosensitive polymers (collagen, hyaluronic acid, and native polysaccharides), autoclaving and hot-air sterilisation are not applicable due to the risk of denaturation and hydrolysis. Gas sterilisation is associated with the risk of toxic-residue sorption, while radiation sterilisation poses a risk of depolymerisation. Recommendations have been formulated for selecting a method for key biopolymers: ethylene oxide sterilisation (with thorough desorption) or electron-beam irradiation of dry forms is preferred for chitosan and alginates; membrane filtration is recommended for solutions of hyaluronic acid and xanthan gum; radiation sterilisation or low-temperature gas methods are recommended for PLA. The effectiveness of combined approaches, such as lyophilisation followed by irradiation, in minimising degradation has been demonstrated. Conclusion. The choice of sterilisation method should be based on a comprehensive assessment of the stability of the specific biopolymer system and validated across a wide range of quality parameters. The integration of gentle and combined sterilisation methods is a promising approach to ensuring the stability and safety of modern dosage forms and medical devices based on biopolymers.
No takes yet. Share an insight, caveat, or question.
Бахрушина et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: