Answers are grounded in this paper and cite their sources.
Hull-surface grinding is an essential yet hazardous and labour-intensive operation in ship maintenance. Conventional approaches, including manual grinding and wall-climbing robots, often suffer from low efficiency, safety risks, and limited adaptability to large working areas. To address these limitations, this paper presents a cable-driven parallel grinding robot (CDPGR) for automated hull-surface maintenance. An integrated framework is developed, incorporating kinematic modelling, cable-tension optimisation, workspace and stiffness evaluation, and experimental validation. Inverse kinematics is employed to map grinding trajectories to cable length, velocity, and acceleration profiles, while forward kinematics is solved using a numerical iterative method. Four cable-tension optimisation methods are proposed under practical tension limits, and the tensioning-force method is identified as the most suitable for stable grinding operation. Supplementary workspace and stiffness analyses are conducted to assess the operating constraints of the developed prototype. A laboratory-scale prototype is developed and experimentally evaluated using an online MATLAB/Simulink–PLC control framework and grinding experiments under different end-effector offsets. The results demonstrate feasible tension allocation and acceptable grinding performance within the identified feasible workspace under the tested prototype conditions, confirming the potential of the proposed system for localised hull-surface maintenance.
No takes yet. Share an insight, caveat, or question.
Wei et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: