Answers are grounded in this paper and cite their sources.
This study investigates the thermophysical enhancement of lauric acid (LA) by incorporating graphene oxide (GO) nanosheets to improve heat transfer while preserving latent heat storage capacity. GO/LA nanocomposite Phase Change Materials (PCMs) containing 0.1, 0.2, and 0.3 wt% GO were fabricated and experimentally evaluated using a thermal energy storage (TES) apparatus employing water (30–70 °C) as the heat transfer fluid. GO concentrations of 0.1, 0.2, and 0.3 wt% increased LA’s thermal conductivity by 48%, 65%, and 86%, respectively. At 0.3 wt% GO, the melting and solidification times were reduced by 21.36% and 27.89%, respectively, while 91% of the initial thermal conductivity was retained after 4000 thermal cycles. The 0.2 wt% GO composite exhibited a latent heat of 182.49 J/g, corresponding to 99.86% retention relative to pure LA. These results demonstrate that substantial thermal-transport enhancement and accelerated phase-change kinetics can be achieved using exceptionally low GO loading while preserving the energy-storage capacity of LA. The increase in supercooling from 1.71 to 3.70°C with increasing GO concentration further identifies an important performance trade-off that must be considered in practical PCM design. The optimized GO loading (0.2–0.3 wt%) achieved an energy storage density of 159–161 MJ m−3, providing an effective balance between enhanced heat transport and latent heat storage. These findings demonstrate that low-concentration GO reinforcement significantly improves nanoscale heat transfer in organic PCMs, offering a promising approach for high-performance latent thermal energy storage (LTES), and low-temperature waste heat recovery.
No takes yet. Share an insight, caveat, or question.
Balasubramani et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: