Answers are grounded in this paper and cite their sources.
This study aims to develop a halogen‐free, flame‐retardant and process stable polyamide 12 powder for laser‐based powder bed fusion with polymers (PBF‐LB/P). Synergistic systems combining aluminum diethylphosphinate (AlPi) with either zinc borate (ZB) or zinc stannate (ZS) were evaluated. Initial screening showed that adding flame‐retardants increased fines content but maintained good powder flowability. Thermal analysis indicated that additives acted as nucleating agents and improved char formation. While the initial blends at best only achieved a UL94 V‐1 rating, increasing the total filler loading to 20 wt% with the 15:1 AlPi:ZB composition led to the desired V‐0 classification. Mechanical testing revealed the typical impact of flame‐retardants as tensile strength and elongation decreased, but stiffness increased. The fabrication of functional parts with a wall thickness of 2 mm seems viable, though dripping limited performance in thinner geometries. Replenishing aged powder with 50% virgin powder resulted in porous parts due to limited coalescence from fragmented flame‐retardant additives and high melt viscosity. However, by refining powder production and mixing processes, the combination of end‐capped polyamide 12 and thermally stable flame‐retardants could offer a viable strategy for creating sustainable flame‐retardant materials for PBF‐LB/P.
No takes yet. Share an insight, caveat, or question.
Neitzel et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: