Answers are grounded in this paper and cite their sources.
We successfully fabricated barium titanate nanotubes (BaTiO3 NTs) via a viscosity-engineered coaxial electrospinning process. Using a constant sol–gel precursor shell solution (11.3 wt % PVP) and varying the PVP concentration in the ethanol core fluid (15.9, 20.2, and 24.1 wt %), we maintained stable composite jetting across a broad rheological window. Notably, we successfully fabricated stable nanotubes when the shell solution viscosity was lower than that of the core liquid, stabilizing compound jetting and eliminating structural defects. Morphological characterization revealed that the uniform, defect-free BaTiO3 nanotubes depend heavily on core-to-shell rheological properties (core viscosity 4.27 Pa·s and shell viscosity 0.55 Pa·s, at a shear rate of 1.85 s–1). To evaluate device-level performance, we fabricated a piezoelectric nanosensor by aligning the arrays perpendicular to the interdigital electrode (IDE) fingers, ensuring optimal electromechanical utilization of the entire nanotube length. Nanosensors calcined at 850 °C achieved a maximum output power of 228.14 nW and an exceptional surface power density of 1141 nW cm–2. These values represent a ∼60% performance enhancement over counterparts processed at 750 °C. The optimized sensor exhibited a stable output voltage of 0.60 V and maintained stable performance after 2000 s of loading–unloading cycles at 0.41 N force. These findings demonstrate that viscosity-modulated coaxial electrospinning is a highly effective route for engineering one-dimensional functional ceramics targeted for self-powered nanoelectronics and high-sensitivity sensing technologies.
No takes yet. Share an insight, caveat, or question.
Shareef et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: