Answers are grounded in this paper and cite their sources.
A 1:6-scale water model was established to investigate the coupled response of bath mixing and liquid-surface stability in a top–bottom combined-blown converter under high-intensity bottom-blowing conditions. Mixing time and multi-point crest-to-trough fluctuation heights were measured under variations in bottom-blowing flow rate, oxygen-lance height, tuyere arrangement, and tuyere blockage. To quantitatively characterise the trade-off between bath homogenisation and surface disturbance, a power-law relationship was established, with the exponent n defined as the mixing–surface coupling sensitivity. Increasing bottom-blowing intensity and lowering the lance enhanced bath mixing but intensified surface fluctuations. The n values ranged from 0.2155 to 0.4457 for flow-rate variation and from 1.3524 to 2.0886 for lance-height variation, indicating a substantially greater surface-instability penalty when mixing was enhanced by lowering the lance. Tuyere arrangement markedly affected both mixing performance and mixing–surface coupling sensitivity. Moreover, tuyere blockage led to asynchronous responses between bath mixing and surface fluctuation: most blockage conditions prolonged the mixing time, whereas surface fluctuations varied nonlinearly with blockage location due to plume-momentum redistribution.
No takes yet. Share an insight, caveat, or question.
Wu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: