Answers are grounded in this paper and cite their sources.
Growing demand for sustainable materials is increasing attention in biocomposites based on natural fibers and biodegradable polymers. This study investigates the influence of porosity and cell swelling in sisal yarn reinforced polylactic acid (PLA) composites with NaOH treated fibers. Composites with epoxy matrix and H 2 O treated fibers are included for comparison. Microstructural observations show that porosity occurs mainly between sisal fibers within the yarn, at the fiber/matrix interface, and inside fiber lumens. These porosities are more pronounced in PLA than in epoxy composites. Quantification using a micromechanical model previously developed by the authors yields a higher fiber correlated porosity factor (0.29 vs. 0.19) and lower fiber stiffness (31 vs. 44 GPa) for PLA composites. NaOH treatment of fibers reduces interface porosity and size of fiber lumens. This previously observed effect is quantified here for the first time. The lumen fraction decreases from 23% to 9%, suggesting inward cell wall swelling. Compared with H 2 O treatment, composites with NaOH treated fibers exhibit a lower fiber correlated porosity factor (0.21 vs. 0.33) and higher fiber stiffness (36 vs. 30 GPa). These findings link porosity and cell wall swelling to micromechanical properties, providing new insight into the reinforcement efficiency of NaOH treated sisal fibers in PLA composites.
No takes yet. Share an insight, caveat, or question.
Ansbert et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: