Answers are grounded in this paper and cite their sources.
Reliable water vapour diffusion properties are needed for the hygrothermal assessment of timber materials within building envelopes. However, wood-product-based vapour diffusion data are quite varied, and humidity-dependent data for Australian plantation-grown hardwoods are limited. This research examined the water vapour diffusion behaviour of solid-wood Eucalyptus nitens at approximately 23 °C under chamber relative humidity (RH) conditions of 35%, 50%, 65% and 75%. Gravimetric wet-cup and dry-cup tests were completed in accordance with ISO 12572 and ASTM E96/E96M. The circular specimens were 200 mm in diameter and approximately 22–23 mm thick, with an exposed test diameter of 180 mm. Water vapour permeability (δ), water vapour diffusion resistance factor (μ) and water vapour diffusion-equivalent air-layer thickness (sd) were calculated from selected steady-state mass-change intervals. The measured properties varied with RH and cup configuration. Under dry-cup conditions, mean μ decreased from 687.68 at 35% RH to 57.62 at 75% RH. Under wet-cup conditions, mean μ decreased from 41.96 at 35% RH to 26.53 at 50% RH and remained within a narrower range at 65% and 75% RH. A single constant μ value does not represent the behaviour measured across the investigated RH range. The study also adds measured diffusion data for Australian plantation-grown hardwood construction materials.
No takes yet. Share an insight, caveat, or question.
Al-Shammaa et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: