Answers are grounded in this paper and cite their sources.
Aiming at the challenges of gas (CH4) drainage difficulties and reservoir stimulation in deep low-permeability coal seams, taking the No. 2 coal sample from Shuanglong Coal Mine as the research object, a high-power ultrasonic experimental system (25 kHz, 18 kW) was employed, combined with low-pressure nitrogen adsorption (LP-N2) and nuclear magnetic resonance (NMR) joint testing methods. The dynamic evolution laws of multi-scale pore structures and specific surface areas of the coal under different ultrasonic treatment durations (0–240 min) were systematically investigated. The results indicate that ultrasonic waves can exert significant physical modification on the coal body through high-frequency mechanical vibration and cavitation effects. As the treatment duration extends from 0 min to 240 min, the maximum adsorption capacity of the coal sample increases remarkably from 4.18 cm3/g to 12.35 cm3/g (a 2.95-fold increase), the total pore volume rises from 0.0062 cm3/g to 0.0187 cm3/g (with a cumulative growth rate of 201.61%), and the BET specific surface area leaps from 3.4 m2/g to 8.2 m2/g (with a cumulative growth rate of 141.2%). Meanwhile, NMR T2 spectrum analysis reveals that ultrasonic modification exhibits significant differentiation characteristics across pores of various scales. The area change rate of the macropore and microfracture intervals reaches 176.50% at 240 min (with a linear fitting slope of 0.79), and its expansion rate and increment far exceed those of micropores and mesopores (with slopes of 0.17 and 0.19, respectively). This effectively breaks closed pore channels and promotes the connectivity of microfractures, thereby substantially improving the overall pore connectivity and gas seepage performance of the coal reservoir.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: