Answers are grounded in this paper and cite their sources.
Objectives Permeability-based descriptions of magnetised pavements give limited attention to particle configuration. This study examines how nickel–zinc ferrite (NZF) particle size and composition influence magnetic flux distribution and coupling.Methods Three-dimensional discrete particle simulations, constrained mixture design and coil-parameter tests at 85.5 kHz assessed phase-averaged magnetic flux density, matrix-field coefficient of variation (CV m ) and coupling coefficient (k) in AC-13 and SMA-13.Findings The 16–13.2 mm fraction showed greater particle-to-matrix mean magnetic flux density contrast, with no reduction in matrix mean magnetic flux density. Under engineering replacement conditions, the 9.5–4.75 mm fraction had the highest CV m and k in both gradations, reaching k values of approximately 0.340 in AC-13 and 0.346 in SMA-13 at full replacement. At approximately 30% total NZF volume fraction, increasing the 16–13.2 mm share near the reference composition corresponded to lower CV m and higher k in both gradations. Local k response directions for the 13.2–9.5 mm and 9.5–4.75 mm fractions reversed between gradations. Tests showed coupling differences at comparable NZF contents.Novelty This study reveals gradation-dependent composition–coupling relationships at controlled NZF content, informing gradation-specific design of composite NZF configurations.
No takes yet. Share an insight, caveat, or question.
Zheng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: