Answers are grounded in this paper and cite their sources.
Polymer coatings offer a promising route toward oil-minimized operation in high-pressure carbon dioxide (CO 2 ) compressors; however, their tribological behavior under starved lubrication remains inadequately understood. This study investigates the performance of polyether ether ketone (PEEK), polytetrafluoroethylene (PTFE), and an aromatic thermosetting polymer (ATSP) vitrimer coating in metal–coating and coating–coating tribo-pairs under high-pressure CO 2 using polyalkylene glycol (PAG) and polyol ester (POE) lubricants. Results show that, at low contact pressures, oil-derived tribolayers may interfere with polymer transfer-film adhesion, limiting friction reduction despite the presence of low-shear coatings. At higher nominal contact pressure (~ 50 MPa), more pronounced polymer transfer films were observed on the metallic counterfaces, accompanied by substantially reduced and more stable friction, particularly for PEEK. These observations suggest that increased contact pressure may facilitate polymer transfer-film formation and retention, although the contribution of localized frictional heating cannot be independently determined from the present experiments. PEEK and ATSP exhibit superior friction stability and wear resistance compared to PTFE, particularly at high pressures and temperatures. These findings suggest that pressure-assisted transfer-film formation and retention, together with lubricant chemistry and temperature, play important roles in the tribological performance of the investigated polymer coatings under oil-minimized high-pressure CO 2 conditions.
No takes yet. Share an insight, caveat, or question.
Asif et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: