Answers are grounded in this paper and cite their sources.
Steel infrastructure is susceptible to chloride-induced corrosion, moisture ingress, mechanical damage, and electromagnetic interference (EMI), while conventional coatings often provide limited barrier durability and no damage-responsive repair. Here, a multifunctional coating based on PFDTES-functionalized six-metal (TiZrHfVNbMo)3C2 MXene, ZIF-8 nanocontainers, and benzotriazole (BTAH) was developed. XRD, Raman, FTIR, and XPS confirmed integration of the components; XPS deconvolution separated metal–carbide, metal–oxide, and metal–fluoride contributions. The optimized coating exhibited a water contact angle of 154.9 ± 2.9°, a sliding angle of 7.2 ± 1.1°, water uptake of 0.42 ± 0.15%, and a WVTR of 0.40 ± 0.10 g m−2 day−1. EIS gave |Z|0.01 Hz of 1.11 × 1010 Ω cm2 initially and 7.41 × 109 Ω cm2 after 70 days. Tafel analysis gave an icorr upper bound of <1 × 10−9 A cm−2; because this value approaches the instrument noise floor, it is reported as an upper bound. Scratch testing with BTAH-free and ZIF-8-free controls showed pH-responsive BTAH release and ≥95% recovery of the intact Rct within 24 h. The coating also showed a hardness of 7.17 GPa, adhesion of 14.69 MPa, low friction, wear resistance, EMI attenuation of 42.10 dB in a free-standing-film geometry, thermal stability to 1000°C, salt-spray resistance to 1000 h, chemical durability, and low ion release. The results support the coating as a candidate multifunctional system; long-term field validation remains necessary.
No takes yet. Share an insight, caveat, or question.
S. et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: