Answers are grounded in this paper and cite their sources.
The paper investigates the influence of an electrical circuit on the electrical and mechanical behavior of structurally optimized piezoelectric energy harvesters. A quadmorph cantilever piezoelectric harvester comprising four PZT-5H active layers is analyzed. Structural optimization is pursued by reducing the piezoelectric material towards a triangular longitudinal section, comparing the performance with the original rectangular structure. Finite element simulations have been conducted, employing a digital twin with a full coupling of Solid Mechanics, Electrostatics, and Electrical Circuit physics interfaces. The electrical circuit emulates the finite input impedance of the spectrum analyzer used in the laboratory. Introducing the electrical impedance shifts the response parameters of interest in both mechanical and electrical domains, changing resonant frequency, stress, displacement, and voltage due to electromechanical coupling. The performance of the optimized structures is evaluated in terms of electrical response per unit volume of piezoelectric material under two relevant approaches: the same inertial mass and the same mechanical stress. The results demonstrate that the triangular structure enables a more efficient use of piezoelectric material, while significantly reducing material volume. The simulations with an electrical circuit indicate its potential use for fine-tuning.
No takes yet. Share an insight, caveat, or question.
Savescu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: