Answers are grounded in this paper and cite their sources.
Partial discharge (PD) is a major cause of insulation degradation in oil-immersed power equipment, and dissolved-gas analysis (DGA) is the principal chemical diagnostic tool for such faults; conventional DGA criteria, however, were developed for mineral oil and may not transfer directly to ester-based insulating liquids. The gas-generation characteristics of mineral oil (Kunlun KI50X), natural ester (FR3) and synthetic ester (MIDEL 7131) were investigated under four representative PD regimes: corona, surface, cavity and floating-electrode discharge, with insulating pressboard present; the corona configuration was tested additionally without pressboard, and all configurations were further examined under higher-energy spark discharge, on a closed-loop oil-circulation platform combining synchronized phase-resolved PD (PRPD) monitoring with automatic oil chromatography. Under moderate-energy PD, mineral oil produces mainly H2 together with the hydrocarbon gases CH4 and C2H2, whereas both esters preferentially liberate H2 and CO, reflecting their ester linkages; the presence of pressboard further elevates CO/CO2 through cellulose decomposition. Under intermittent sparking, the C2H2 and H2 production rates converge across the three fluids, indicating that molecular-structure effects diminish once repeated dielectric breakdown occurs. Within each PD mode, estimated cumulative discharge energy and cumulative dissolved-gas volume are linearly related, but this linearity deteriorates when data from different modes are pooled. Conventional mineral oil DGA schemes therefore cannot be applied uncritically to ester-filled apparatus; reliable fault diagnosis requires combined electrical (PRPD-based energy quantification) and oil-specific chemical (DGA) diagnostics.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: