Answers are grounded in this paper and cite their sources.
Replacing rolling bearings with journal bearings is a promising approach for enhancing the power density of high-power wind turbine gearboxes. However, adopting planet gear journal bearings alters the dynamic responses of wind turbine gearbox planetary gear sets. To investigate the impacts of journal bearings on the tribodynamic characteristics of a planetary gear set, this study develops a coupled numerical solution procedure that retains the sun gear, carrier, ring gear and each planet gear. Relative motion provides the lubrication boundary conditions, and integrated hydrodynamic and asperity-contact pressures provide the bearing forces in the equations of motion. A published spectrum provides a qualitative dynamic benchmark. The simulation results for two pressure measurement points were compared with the experimental data under six load conditions, the average relative errors were 6.26% and 4.94%, respectively. Parametric analysis indicates that increasing bearing clearance reduces acceleration RMS and bearing-force fluctuation but increases eccentricity. Higher lubricant viscosity reduces eccentricity while increasing the dynamic response metrics. At the larger prescribed wear depth, eccentricity increases and minimum film thickness and peak hydrodynamic pressure decrease. The model provides a numerical tool for tribodynamic analysis of wind turbine planetary gear sets supported by journal bearings.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: