Answers are grounded in this paper and cite their sources.
Corrosion in oil and gas pipelines is strongly influenced by environmental chemistry and pipeline location, affecting reliability and safety. This study examines the corrosion behavior of API 5L X65 carbon steel under top (TLC) and bottom (BLC) conditions in sweet (CO 2 ) and sour (H 2 S/N 2 ) environments at 20 °C – 30 °C. Uniform corrosion rates (UCR) and pitting corrosion rates (PCR) were measured using weight loss (ASTM G1‐03) and surface profilometry (ASTM G46‐21), while scanning electron microscopy (SEM), energy dispersive x‐ray spectroscopy (EDX) and x‐ray diffraction (XRD) characterized surface morphology and corrosion products. In the sweet environment, top‐of‐the‐line corrosion and bottom‐of‐the‐line corrosion showed similar uniform corrosion rates (0.28 mm/y). Pitting corrosion was moderate, with pitting corrosion rates of 0.89 mm/y for top‐of‐the‐line corrosion and 0.67 mm/y for bottom‐of‐the‐line corrosion. Products were mainly thin Fe 3 C layers, with NaCl deposition only at the bottom. Under sour conditions, bottom‐of‐the‐line corrosion exhibited higher uniform corrosion rates (0.29 mm/y) than top‐of‐the‐line corrosion (0.22 mm/y), with more severe localized corrosion; pitting corrosion rate reached 1.94 mm/y at bottom‐of‐the‐line corrosion versus 0.43 mm/y at top‐of‐the‐line corrosion. Multilayered FeS scales formed in H 2 S environments, partially protecting the top, while bottom surfaces experienced combined sulfide and chloride attack, promoting localized pitting. These findings show that pipeline corrosion depends strongly on chemical environment and steel position, emphasizing the need for localized monitoring and targeted mitigation strategies to maintain pipeline integrity.
No takes yet. Share an insight, caveat, or question.
Taqiuddin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: