Answers are grounded in this paper and cite their sources.
Boron-modified phenolic resin (BPR) combines high thermal stability and char-forming capability with pronounced moisture sensitivity. Here, octyltriethoxysilane (OTES) was introduced into BPR by chemical pre-reaction or physical blending, and the resulting resins were evaluated in glass fiber-reinforced laminates. FTIR, XPS, and ICP-OES provided complementary evidence consistent with chemical incorporation of OTES and showed that the pre-reaction route produced a more uniform through-thickness distribution of Si-containing species, whereas physical blending caused pronounced surface enrichment. The chemically modified laminate containing 3 wt.% OTES (BOG-3) showed the best overall performance. Relative to BOG-0, its equilibrium water absorption and moisture absorption decreased from 4.4% and 2.2% to 1.8% and 0.95%, while dry-state flexural strength increased from 181.72 to 234.52 MPa. Thickness changes after water immersion and moisture conditioning decreased from 6.60% and 4.52% to 1.63% and 0.70%, with flexural-strength retentions of 89.9% and 96.8%, respectively. BOG-3 also exhibited a higher room-temperature storage modulus and a higher residual mass at 1000 °C. These results identify chemical pre-reaction with 3 wt.% OTES as an effective route for improving BPR/glass fiber laminates intended for prolonged humid storage or standby service.
No takes yet. Share an insight, caveat, or question.
Xiong et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: