Answers are grounded in this paper and cite their sources.
This study evaluates the durability performance of concrete incorporating copper slag as a partial fine aggregate replacement and polyethylene glycol (PEG 400) as a self-curing agent. PEG 400 was selected due to its high-water solubility, compatibility with cementitious systems, and its ability to retain internal moisture within the matrix. M20, M40, and M60 grades were assessed under acid and sulphate exposure, rapid chloride permeability, and elevated temperatures, supported by SEM-EDS‑based microstructural observations. The inclusion of copper slag refined the pore structure and improved the interfacial transition zone, while PEG 400 promoted sustained hydration, resulting in a compact and less permeable matrix. Elevated temperature exposure caused progressive strength degradation in all mixes; however, the optimised M60 mix containing 40% copper slag and 1.5% PEG exhibited a limited strength reduction of 42.8% at 800°C, compared with reductions exceeding 52% in the control concrete. Chemical durability tests revealed lower mass loss under acid and sulphate environments, and RCPT results confirmed a substantial decrease in chloride ion penetration in modified concretes. This research supporting sustainable construction through reduced natural sand usage and effective utilisation of industrial by-products.
No takes yet. Share an insight, caveat, or question.
R et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: