Answers are grounded in this paper and cite their sources.
Porous refractory components used as auxiliary equipment in oxide-ceramic sintering systems should combine sufficient mechanical integrity with low thermal mass and dimensional stability. The material investigated in this work was previously developed as a polymorphological Al2O3-based composite manufactured by a water-free uniaxial pressing route. Its manufacturing process, microstructural architecture, porosity, mechanical properties, and refractoriness under load were reported in an earlier study. The present work constitutes a continuation of that investigation and focuses on previously unpublished functional thermal properties, including thermal expansion, thermogravimetric–differential thermal analysis (TG–DTA) behavior, specific heat capacity, and sintering shrinkage. The composite exhibited a coefficient of thermal expansion ranging from 9.01 × 10−6 to 9.43 × 10−6 °C−1, a specific heat capacity of approximately 1114 J kg−1 °C−1 at 1000 °C, and linear shrinkage of approximately 1% after sintering at 1700 °C. To relate the mechanical performance of the material to its thermal mass, an energy efficiency index (EEI), defined as the ratio of flexural strength to volumetric heat capacity, was applied. Comparison with data for porous refractory materials available in the CES EduPack database placed the developed composite in an intermediate range of functional performance. The results indicate a potentially useful balance between mechanical integrity, dimensional stability, and volumetric heat capacity. However, the comparative assessment is based partly on database data, and long-term thermal-cycling durability requires separate experimental validation.
No takes yet. Share an insight, caveat, or question.
Spyrka et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: