Answers are grounded in this paper and cite their sources.
This research investigated the modeling and simulation of PID controllers for temperature and fractional conversion control in a Continuous Flow Agitator Type Reactor (CFATR) producing ethyl acetate through the esterification of acetic acid and ethanol. First-principles dynamic models of mass and energy balances were linearised into transfer functions and implemented in MATLAB/Simulink. Manual PID tuning with various gain sets (e.g., (3,8,1), (8,3,1), (1,2,2), (15,12,6) for temperature; (4,8,5), (2,4,5), (1,2,3), (1,2,2) for conversion) revealed that aggressive gains caused excessive overshoot (up to ~29.6% for temperature), severe oscillations, and prolonged settling, while conservative tuning yielded smoother responses with minimal ringing and settling within 6–8 s. MATLAB auto-tuning produced superior results: well-damped trajectories with only 3% overshoot and 10.1% overshoot for temperature and conversion loops respectively, negligible residual oscillations, zero steady-state error, rise times of 1.52 s and 1.57 s, and robust stability margins (gain margin 5.62 dB / phase margin 80.1° for temperature; gain margin 7.26 dB / phase margin 60° for conversion). The temperature loop favoured a PI structure (P=0, I=2.3266, D=0) and the conversion loop used P=0.64613, I=1.8727, D=0. These findings confirm that auto-tuned PID controllers effectively balance speed and stability, preventing thermal excursions, maintaining conversion near 0.95 for optimal yield, and ensuring safe, consistent, high-quality ethyl acetate production in an industrial CFATR setting.
No takes yet. Share an insight, caveat, or question.
Chimene Omeke Wosu (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: